Decorative ornamental plants easy to grow

Trees always bring many benefits to people. Therefore, when designing the house selection of plants in the garden is a lot of people focus to create unique and new garden landscaping. Rounding out the favorite plants grown in lush gardens all year round brings the best space for homeowners.

1. Red Roses

Common name: Hong Loc

Morphological characteristics: A shrub, branched, slightly upward, forming eggshell or oval. Leaves are oval, pointed tips, shiny green, young leaves are colorful, often pink or orange color is very beautiful.

Physiological characteristics: Red lentils are light-loving plants, have strong vitality, moist and cool, however, they must be sunny, planted in cool and favorable areas to develop in all directions. the color is more fresh.

2. Tiger Tree

Common name: tiger tongue, giant tiger, giant tiger

Morphological characteristics: The plant has hard leaves, grows into dust, grows tapered at the head, wavy yellow leaves stretching from root to tip. The leaves can be up to 1.6 m long and 8 cm wide.

Physiological characteristics: It is a living species with dry, hot, direct sunlight. However, the Tigers are well adapted to shade or semi-shade. Good adaptability to dry soil: sandy soils, sandy soils, gravel and soils should be alkaline.

3. Cucumber colorful

Common name: guava, guava, guava, guava, guava, guava.

Morphological characteristics: Wood species, small dust, height about 0.3 – 2m. Leaves are blue, oval, opposite, heart-shaped or rounded, pointed, pointed, serrated, hairy under. The bunch of flowers on the top of many colors should be named five colors.

Physiological characteristics: Leaves live in many places because of strong vitality, almost no care, less pestilent, cold, heat, drought resistant, quite good. Shades like sunshine, the sun shines as the flowers and colors are richer.

4. Camel palm

Common Name: Camel Stone

Diagnostic characters: The hydrangea is a deciduous shrub, with moist shade. Leaves opposite each other on the body, simple, with stalks, leaf edges serrated and sometimes lobed. Rhinoceroses on the top of the head, flowers cloned. The flower cluster is round or oval with multiple flowers.

Physiological characteristics: Hydrocarbons are plant species, depending on whether the pH of the soil is high or low and the plants are in shade, the moisture will turn into blue or pink and other colors.

5. Ficus seedlings

Common name: Ngũ gia con birds, Ngũ Gia Bí Marble.

Morphological characteristics: The leaves have double leaves, divided into palms with 8 leaflets. Elliptical, shape change, each leaflet 7-17 cm long. The leaves are sharp at the top or tapering and somewhat blunt, near the taper, with the raw edge

Physiological characteristics: Pelagic herbs are suitable for hot, humid climate, tolerant and adaptable to high habitat.

6. Hybrid Plants

Common name: Tree Hyacinth, Red Leaf Red Lime Tree, Lime Tree, Blood Tree, etc.

Morphological characteristics: evergreen shrubs with a scion-like stalk as they are coconut and can be up to 3m high. The leaves have a blade shape, long stalks are oblong and the grooves on the top. Leaves 30 – 50 cm long, 10-15 cm wide, tapered head, tapered head, wavy original edges and may be blue, purple or combination of different colors such as purple, red, White gold.

Physiological characteristics: Preferably semi-bright or semi-glossy. Where the sun is full of blood, plants need more water. Although trees can live in low light conditions, they will not produce vivid foliage. Water the plants in the dry season and keep the relative humidity.

7. Evergreen Tree

Common name: Truc nhat tree, exotic tree

Diagnostic characters: The trunk grows into dust, with small branches. Leafy or rounded leaves look like bamboo leaves. The tip has a nose, has a small sheen, the blade is light blue. Flowers grow in long bunches, sprouting at the top, small round fruits in red or yellow.

Physiological characteristics: Shade tolerant trees, however, should give the plant exposure to light often ensure good trees.

The above are the plants used in many garden construction. These ornamental plants do not require growers to spend a lot of time caring for them, nor should they be mindful of them as they adapt to the environment quickly.

Beautiful garden style for the house

Garden design is one of the ways to decorate the exterior creates the space to have fun, relax most comfortable. There are many beautiful and impressive garden design ideas, depending on the style and the area of ​​each house that has a nice garden design. The small garden is designed beautifully and eye-catching to create a living space extremely comfortable. Let us refer to the garden samples that are introduced in the following article.

Garden design with accents as unique decoration

With the way of garden design create beautiful garden decoration, reasonable contributes to decorate living space ideal and more comfortable. With intelligent design and processing solutions, garden designs bring nature to your home.

Create a quiet space

There are many beautiful small garden designs nowadays that bring more benefits to the homeowners. With a small garden area, give your family members a quiet moment to rest, relax the best.

Bring green trees to the main in European style garden design

Garden design in modern European style, using the landscape garden, trees, relaxing swing to create harmony of space. This is one of the most popular garden home for many, as it brings new colors to the garden, the cool, temperate air.

Garden design incorporates a simple set of tables and chairs

Although the area is quite limited but the owner still has a small outdoor space with a set of simple plastic rattan furniture, some green trees for the garden more beautiful. Helping to feel more comfortable in life, this is the living space that many homeowners pay attention to when designing a beautiful home.

Design a small garden to rest

Designing a small garden for relaxing, dining and relaxing is ideal with the use of air purifiers combined with super-cute and super-cute tables and chairs. This is one of the simple little garden designs that do not take up too much of the owner’s time.

Garden design creates a dining space

The garden design creates an outdoor dining space, with the idea of ​​designing this garden suitable for small and large garden areas are suitable. Just put a small table, decorate the tree and add a light system is a cozy gathering space.

The garden is filled with green trees creating the most relaxing and peaceful space. The small weekend parties with friends and relatives are held outdoors in the natural space is also the idea of ​​making people more surprised and excited.

The combination of garden design for you more ideas garden home decoration was introduced by us will give you more ideas to refresh the garden space of the family.

Tools needed to care for ornamental plants

You are looking to take care of your own little garden and you are wondering what equipment to prepare? Please refer to the article below for easier care for your garden offline.

Gloves

The first thing that is indispensable when gardening is gloves, always have at least a pair of gloves to protect your hands. Gloves have many types: cotton, rubber, leather, elastic … You can choose a pair of gloves that match the material and work you do.

Scratch

Used to flatten the bed and make the soil porous, airy, in addition to scraping off the debris from the narrow place, a gardener feels very light in the work when the season Thanks to the rake, it can scrape away thick leaves and humus.

Shovel

Every gardener should own at least a good shovel, which should also have a slightly curved blade. It can be used to dig deep holes quickly and easily. For a long-term use, a gardener should choose a shovel with a blade that can be sharpened as needed.

Pick

There are many different types of hoes, but for easy use in gardening you should choose the right sized hoe, metal handle and plastic cover. It is very versatile, can dig dirt, compacted, can dig, mix and move the soil.

Pruning shears

There is no list of garden tools without the need for pruning shears. Pruning shears are used primarily for pruning leaves, or dead leaves that need to be removed so as not to affect the plants.

Fly

Gardeners often have a pointed blade, curved to draw. It is used to make soil, digging small holes, especially for planting and weeding, mixing fertilizer or other additives. It is also used to move plants into pots or containers.

Sprayer

Water is indispensable for plants, so gardener should have a water tank for compact plants, with shower so that water can be irrigated evenly throughout the crop without fear of crushing flowers or planted soil. too tight.

Saw

The best type of garden saws will have a slightly curved blade that makes it easy to prune woody plants. This type of saw also can be used to remove stems and cut small trees. It is a very versatile tool that should be included in gardening kits.

Pull big

The large scissors are long, sharp, and strong scissors that can cut tall trees, are woody, can form, block a wall, etc. When investing in a pair of scissors pruning you should choose the kind of sharp, light weight for easy use in garden care.

Lawn mower

If your garden is sized, you do not have to choose a large size machine because it is very expensive and does not use all the power. it. A lawn mower makes your garden look neat and bright much better.

Here we have shared with you about the necessary tools in the garden, hoping to help you care for the plants as you want.

Guide to make cuts quickly scarring

In bonsai creation, we can not not cut the stem to dwarf and shrink the tree so that it can be planted in the tub, also can not be cut not by the right branch or not suitable for the idea.

But in order for these cuts to be quickly scarred, there are no longer pieces of shortage of aesthetics, we should cut deeply into the stem or iron to the stem, forming a V shape, and then use a razor blade Remove the outer layer of the bark of the cuticle, exposing the growing layer of cells that are supposed to develop the cuticle necessary for rapid wound healing. If there is a piece of wood protruding after the cut saw will cause damage to the tree later.

Once the outer layer of the skin around the cut has been removed, the wound must be painted with a special glue that is easily purchased from the pet biology service.

However, after a period of several months, it is possible to use a sharp knife to pierce the old wound and it may still continue to rot, although the wound is covered with a non-stick coating. Therefore, it is necessary to remove all of the rinsing layer and to create a drainage ditch for the wound so that the water does not remain in the rump causing the next rinse condition. When this work is done, we must paint the wound with a sticky, non-moldy glue like the first time, and this job must be done three to three times until the cells grow out. Traumatic mouth makes a charmingly attractive scar.

In order to quickly grow the scar, we can put the plant into a special care regimen, providing the necessary nutrients and keeping the plant in the most comfortable state. Absolutely do not let the plant under hot sun hot, this is easy for plants to escape the water leads to dehydration, shocking the tree. Do not leave trees in places where there are strong shocks.

The above are the instructions to help you quickly recover the wound in the process of shaping decorative bonsai.

Things to keep in mind when planting plants

The orchid when purchased just to decorate the house is very beautiful, green foliage sums up. About a month later, the tree will be yellow leaves branch branches are wilted, then to take the pot to another place or leave. In order to make the pots always green, the landlord needs to pay more attention to the care of the trees in their home.

The light

Flowering plants can live in shade or low light conditions, but in the house there are very few places where light is placed, usually only near windows or wells for hours. shining through.

Signs to identify plants lacking in light, insufficient for photosynthesis are the lateral leaves smaller than the original leaves; lighter green. So the landlord needs to understand the light needs of the tree so that he can choose the location to suit. If the plants spread in closed rooms; Weekly move the plants out in the shade under the trees to change the air.

Flowering plants are watered too much

Floating plants have different demands for water outside the tree; Because of lack of sunshine and ventilation, it is easy to excess water in pots. This leads to the root system of the plant being damaged by young roots.

Weekly only water the plants 2-3 times, each time watering just enough to wet all the roots; Then wipe off excess water under the bottom of the pot.

Irrigation water

In case the home owner is busy working a new week to water plants once in a house; The tree will always be short of water and drought. Leaves are always yellow edges, trunk is no longer glossy due to lack of moisture. As a result, the interior is suitable for the environment full moisture. If you really do not have time to care for home decor should not be.

Temperature

In the house with appliances such as air conditioning, kitchen steam oven… should be avoided to spread near the place is too cold or too hot to make trees die. At that time the best option is to use artificial flowers of plastic flowers to cover the place where the machine is.

Nutrients

After about a year, the plants have grown and have used up nutrients. Young roots tend to grow on or off; You need to replace the plant with a larger pot. When replacing the bowl, remove the whole plant; Then select pots larger than the old pot about 10 cm (height and breadth) to increase the volume of nutrients for the plant.

Leaf hygiene and pest control

Trees that are either indoors or dusty to the leaves will reduce the transpiration. Weekly, dust should be cleaned with a soft cloth; gently avoid to tear the leaves; Check that the plant has sooty sores on its leaf axils or under the ground. If the soft white patches on the tops; Remove the leaves by hand or take the plant out to wash the shower.

In addition, there are yellow spots on the underside of the leaves; The trunk should be washed with hand or tap. Then use garlic powder or chili to spray the body to help push the bugs attack the tree. Do not use spray pesticides in the home will affect people’s health especially the elderly and children.

Fertilizer

The orchid needs less light, so the demand for fertilizer is not high, if fertilizing will cause the plant to shock the stool can cause rapid death. Apply some organic fertilizer such as vermicard or dynamic lilter fertilizer, add B1 and foliar fertilizer.

How to care for Bonsai

Bonsai, as well as orchids, are very easy to grow, but it is very difficult to keep them if we plant them properly and do not have time to care. Bonsai is more difficult than orchids because of the way to grow in the soil, the soil is very dry. Fertilizer too much tree grows in the form of bonsai, less feces, not enough nutrients will die. Water and light also, what is just enough not excess not missing.

One of the most important factors behind the chosen tree is the pot. Pots should be suitable for plants, round pots, square pots, rectangular pots, polygons, ovals. The color of the pot should be in tune with the tree to create a more balanced balance with the tree.

In addition to the pots, Bonsai must also be accompanied by moss, it makes the necklace and the Japanese often prefer to stone beautiful with the bonsai or to the side to increase the rhythm (accent) of the tree.

Your bonsai should be placed in a well-lit place. If there is not enough UV (ultraviolet light), the plant will die. During the day, the tree should be kept warm at a minimum temperature of 60 degrees F. At such a temperature the tree can regenerate its energy and develop normally. You should spray the leaves regularly. Never, ever, put your bonsai on a disc or a pot full of water, as this can cause root rot. And in the evening, of course, you can cool the bonsai tree, as well as place it in the natural environment.

You should replace the pots for the plant every two years, and preferably instead of the spring. When you go to pots, you need to prune roots. Depending on the size of the roots, trim from 1/3 to 2/3 from the root tip. You may want to replace the old pot with a similar pot to maintain the old effect. And remember to drain the drainage system for the tree. If it is too wet roots will rot. Bonsai pots are more shallow than other common indoor pots. So, if you want to fertilize the plants, you need to dilute the fertilizer to match, otherwise the liquid will burn the roots. Bonsai need to be fertilized about once every 3 weeks – but do not apply it in winter.

Your bonsai needs to be trimmed and bent regularly to maintain the desired shape. You should do this in the spring – before the vegetation season begins to develop, and then do it often throughout the spring. You need to know what kind of tree you have before cutting it – for example, if you have a banyan, you should prune all the leaves.

Since your bonsai is placed in a shallow pot, it can be very susceptible to pests and diseases. Frequent watering to maintain moisture also facilitates insect pests such as aphids, caterpillars, ants and red spiders. You always have to pay attention to the unusual signs of trees to detect pests and diseases in time. When there are abnormal signs, pesticides should be used. The most common diseases in bonsai are fungal diseases. If you see a layer of white powder covering the shoots and leaves, it means that your plants have been infected with Mindi. You need to consult the experts to treat the plant because the fungus has a very fast growth.

When you look at the bonsai you pay much attention to the leaves of the tree. If you see an orange or brown rust on the leaves, that is probably too much potassium. If your bonsai does not have enough iron, the leaves will turn yellow while the veins remain blue. This disease usually occurs in soils containing chalk or limestone – the soil that keeps the iron. In this case, replace the pots and replace the compost.

You should wash the bonsai regularly with a small brush. Do not leave any part of the plant on the ground after you have pruned – it will decompose and give rise to fungal and moss diseases. Some people think that moss is a plant ornament and does not want to be mossed. In this case it is advisable to keep the moss from growing on the trunk and branches – using a special fly, or a nylon toothbrush to remove the moss on those areas. Use tweezers to remove the grass – remember that any grass can absorb nutrients from the plant.

The planting and care of bonsai is an art. If you want to find out more thoroughly and thoroughly, look for books, materials and consult with experienced players. Hope the above tips help you to imagine what work to do after buying a home grown bonsai and enjoy.

Technique transfer pots ornamental plants

Turning pots is a must-have for bonsai and bonsai players. Long time no pots, damaged trees. Transfer of false pots to sick plants and remove branches or die. Most of the houses are more or less ornamental or exterior decoration. Therefore, the introduction of pelvic transfer technology is very necessary.

Move to 6 different purposes

– Plants grown in pots perennial, hard soil, colorless, rooted plants clinging to a thick layer around the pots. Summer sunlight into the pots heat the roots inside, the tree back to the end should die out and die. Compelled to transfer to replace the land for trees.

– For Cymbidium, in addition to the above purpose, the purpose is to propagate (spread).

– Fix roots, cut root rot, excess roots, mold for beautiful roots, raise root emerged.

– Change pots, tanks are growing into a pot, other tanks to suit the tree, increasing the artistic value of the tree.

– Changing the look of the tree is more spectacular than the old one.

– Drainage in waterlogged pots.

– Leave the plant out of the pot: Avoid digging and absolutely not be pulled up root. In this way, the tree is cut off its roots and dead. If the soil in the pots, we put the pot on the soft ground, two hands holding the mouth of the pot to tilt the pot forward, pulling back quickly several times. So turn the pots that lay. All the land will separate from the pots, we just pour out the tree, intact. If the tree is big, a pelican falls, a tree supporter.

If the land is cut, I take a stick of iron head flat poke around the pots down to the bottom. Then do the same.

In addition, the root canal is used to push the entire root through the drainage hole at the bottom of the pot. If we have not yet, we water the water to thoroughly bundle the whole pot or use the last measure is to immerse the pot into the water waiting for water to infiltrate the soil in the pot, we put the plant out, drain and lay As mentioned above, it will be easy to pour out the plants.

To see pots swell hips, mouths under the pots, re-planted for a long time without repotting, apply the above measures can not be, with the roots live, use a knife straight to the bottom of the pot and round The pots and pour out, with precious trees or plants that are hard to calculate which pots are not worth the pot should be dams for trees.

The orchids do not allow the peach, digging, rooting, but only watering the roots to remove the pot from the bowl and gently shaking the pot spreading. The roots are big but very crispy, so be careful not to break.

– Treatment of rhizomes using cutting edges around and under the bottom of the roots. The roots are cut very neatly without breaking down roots quickly regenerated. Trees on the ground always reflect the status of underground roots. At the head easily cut off will be spraying more bunches of new roots to be eaten new soil should grow strong. Limit the use of sharp rods or rake to drain the soil so that roots can be severely damaged so the rot and dead trees. Root picking must also be done at the same time. The other three purposes are to make sure that at least half of the new soil is replaced, the rooted pickling frame is suitable for the pot, which will help to put the plant into the pot. the shape should be corrected.

If the bottom of the tree is too long wood, it is the remnant of the branch branch when cut more deeply cut at the cuttings always have to cut under the gourd, the larger, the longer the excess wood, the tree can not. Planted into the tray, tank. I cut off the cutters with a light saw.

– Replanting the plant into a pot: Choose a pot, color tank, shape size suitable for the tree and 10 drains. At the bottom of the pot must be large. If the pot has as many drainage as possible. Get ready for the right type of land. The soil used to transport pots must be completely dry. If the soil has been exposed to the place of sale semi-positive (shed, patio) year and then as good. Planting pots requires knowledge. The first is the drainage hole. Easy plants, stagnant water does not die a little, just put a piece of porcelain up the hole is. Choose a piece of chinaware when facing the channel hole. The trees require fast drainage, such as orchids, orchids, azaleas, as well as the use of high-grade piece of crockery up a little.

Then place a bottom layer of solid coal slags, then lay the soil, then cover the soil to invite the tree. Around the pots also litter and then small. Surrounding the root musters for the entire soil. On the surface of the pot also lay a large clay soil to prevent water splashing on the ground and cause the pellets to pelvis. Normally other plants do not need so picky, just note that around the root must always for colored soil.

Important is the position of the stem in the pot, the need for the middle or the deviation of any side, the lower height of the correct plate, the correct shape. To do this, we put trees, insert temporary soil and then look at four faces, watching close and watching from afar to adjust, ever tree in the best position to fill the land. Ground around the gourd slowly from each layer, using the rod head, then shake the pot, followed by watering the rain pattern for the soil to enter every corner of the root, there is no new hole.

Plants such as tea, azaleas, cymbals are comfortable lumps of large soil on the pot. Other plants can not enter the soil filled mouth, so that when the water will drain away immediately, at least to run around the groove to keep the water to drain.

Harms due to errors in planting techniques

Ridiculous or erroneous care of ornamental plants or care for unusual changes in the tree, causing the plant to be diseased or damaged can lead to death.

Golden leaf: Yellow leaves and falling leaves are normal, but young leaves are growing yellow and fall often can be due to excess light, the roots are infested by insects or fungi, root rot caused by fertilization. lots of water or too much water ..

Black-tipped leaf: may be due to two causes: excess nitrogen or water with high salt or chlorine. In some varieties, the old leaves before yellowing and fall often also black-tipped leaves.

Root rot: Too much water, or poorly ventilated or too old, may be caused by too much fertilizer.

Wrinkle irritation: Irrigation is not sufficiently moist or the root system is severely damaged. It may also be due to unplanned extraction, after removal of new roots.

Plants do not flower: When the plants mature, the rest of the crop is not properly respected or the tree is not bright enough during the growing season.

Yellow buds and fall: Usually due to high day temperatures. So when the flower starts to rise, it should cover the light directly below 50%. Yellow flower buds are also found in late flowering varieties in March and April, when the day is high. It should be placed in a cool and moist place. Nitrogen and phosphorus also cause the phenomenon.

Make use of organic waste as a fertilizer for ornamental plants

Solid waste is an endless source of material for many countries around the world. If we make use of them, they will become raw materials, but if they can not be treated, waste will become a national problem. The composition of solid waste has many kinds: inorganic and organic. Garments can be recycled and can not be recycled. As a result, solid waste can be divided into occupational, industrial, agricultural and medical waste. By toxicity, solid waste is classified into two categories, toxic and toxic to humans, livestock and the environment.

In this article, we refer to solid waste in daily life, in which the study of garbage can be utilized, processed into micro-organism to grow plants, vegetables, beans, household size and administrative units, agencies, urban enterprises and rural areas.

The results of utilizing waste at source will reduce waste to be transported to landfill, save money for the State and people, save land resources, prolong the life of landfills, Utilizing waste, bringing economic benefits, associated with environmental protection.

Method of implementation: Use organic waste daily, such as vegetables, roots, fruits, chop them into strips, put into plastic buckets with a capacity of 15 to 120 liters, depending on the level of waste of each family. Bioproducts have the effect of activating the rapid decomposition of organic substances. Remove the husk ash spread over a thin layer of about 2 – 5cm up, cover, cover the corner or a suitable place to avoid rain water flowing. Daily for additional organic waste, yeast probiotics and rice husk ash, concentrated within 1 week. When near full bucket will move to the second bucket. Note find the location to poke appropriate. Decomposition of organic waste into micro-organism after 20-25 days. Garbage and put into the pot to grow flowers, plants, vegetables, beans.

For households with garden land, dig holes with a capacity of about 1 m 3 / hole, digging two to three holes together, making roofs or roofs simple to cover rain, sunshine for garbage pits. make fertilizer In addition to organic waste, if there is manure mixed with garbage and probiotics, rice husk ash, will form high quality organic micro-organism. For waste, muddy soil can be used to cover the hills.

In the composting process, it produces gas. For mud pits such as composting manure, gas appears, the mud cover will split itself into each other to escape gas. For plastic bucket to store garbage, gas occurs after about a week, so when the lid is open, should wear a mask or not covered too carefully. The amount of gas released is not high, so the impact on health and environment is not significant.

On average, each day, each person emits 250 to 400 grams of garbage. Households with a size of 5 persons / household will discharge from 1,250 to nearly 2 kg / day / household. Thus, after 7 days, will release 12kg, combined with rice husk ash, so if using bucket 15 liters, can store waste in a week / household. Using a paint container will be more durable and cheaper than buying a plastic bucket or a new bin to store the waste. The microbiological supplement should not smell bad and do not pollute the environment. In the composting process, if the garbage is too dry, it should be sprayed with water, creating a humidity of about 50-60%, which will facilitate microorganisms to grow and easily decompose organic matter. The composted garbage will be transformed into pots of flowers, ornamental plants, vegetables, beans, on the shelves, on balconies, terraces or other suitable places.

The simple benefit of producing fertilizer is not much, but if the costs of collecting, transporting, treating garbage and building waste land are taken into account, the waste from many households, agencies, enterprises This will significantly reduce the state budget and also contribute to the cleanliness of the environment.

How to bend wire bending ornamental branches

Paring and bending are the two methods of bending trees in shaping ornamental plants, in this article we will guide in detail these two methods.

Bending by wire

Crimp is the first lesson to make a bonsai. If we do not know how to bend properly, we can not make a beautiful bonsai. To make beautiful branches, it is necessary to have the difficulty of the curves. If we do not bend the string properly, we can not bend the tree to our liking.

To begin with, I instructed you to bend from the trunk, the small branch. Before we bend we have to determine what is the shape of the bending, why do you often ask me to draw a draft? Then people do not just do not know, but I know everyone looks, suppose only one tree from the bottom up as stark as a lamp, people can see the whole tree It’s like I drafted it for you. When a tree is bent we bend in principle from big to small, which means that we have to bend the largest branch to the next small branch, from the tree to branch, branches. The concept of primary branches is the main branch, the branches are divided from primary to secondary, then to secondary, and the next. These are the words that need to be unified. In one of the most beautiful bonsai is able to be level 5, which makes level 5 to avoid being limp is very difficult, most of you level 3 is finished.

First bend from the stem first. An experience to support the rope for you, if we bend the ropes for the big branches, to go a stretch we prepare to bend, we should take twice as long as the bending path, branches to much. When bending is tight, do not cut the excess. With small branches, small strings we only need to fold in half. This is the relative rate, the small experience itself see. As mentioned, this tree, for one strand, goes best with the least strings, especially those with less curvature, we bend from the stem. First cut the branches identified as not used.

With the wire wrapped, so little use, later the shell is only moist, very susceptible to mold, easy to eat bark, should use aluminum ceiling than the cover. And not to be uncomfortable when you do, the cover is just sloppy, we bend the hook. I pin one head to the ground to fix it as a fulcrum. Bending in the direction of the bending direction we want to bend, then the wire will go into the body, bending the opposite wire will open. To bend a tree properly, we bend about 450, the force hitch hugging the body, trying to bend evenly – just look aesthetically with the force to bend, one hand holds the bending part nearest as a fulcrum, one hand wires and bends.

Here, a technique to avoid, most of us originally bending branches, usually at the crossroads of branches or we are torn (cracked), to overcome, we bend in the way: to the fork three rounds it is hard, there is more (for the pet) we turn around a branch. Another experience of bending, to find the bending direction to force the wire to tighten, after selecting the finished face, all the branches on the left bend to the left – counter clockwise (viewed from this branch) , when we bend the end of the wire, we must lock the rope – the cords crossed the rope again, the branches will not slip and be pulled out of the rope, cutting the excess rope so that the rope back to the aesthetic. To bend the right branch, we bend to the main body to be the fulcrum, bending in the direction of clockwise (from the top).

Crimp for small branches in the same direction with big branches. Bending so that the wire bending under the branches – branches remain the same. Bending to the final limb.

Borrowing branches

Crimp is finished, we come to bending body, shake coal is arbitrary, feel each other. When bending does not need to know, but at the point – the curve must have a locking point at that point, not to be torn, broken branches. Note when bending need to turn the tree – branch with bending.

To bend branches, shake the depths, shake the first one back (not most), the second to break the front but slightly down a bit (like springs) to create depth of depth. According to the size of the branches, shrinkage. Normally a spike makes about 5 co. However, we avoid equality, and our emphasis is on corrosion – sparse, rounded – distorted, but must follow the whole. For monstrous (soft-bending), we use 2 small shrubs in a coil. From a creative aesthetic perspective of each person will create different but different.

The branches are brittle, to bend, we bend the type of spring, just bending spin. Should have a branch on each vertex, between the two ends should also have a branch to create frost – the thickness of the branches, called chasing branches, choose to cover the space and not be hidden, Like the main shrubs for branches – secondary branches. Branches in square steps, should not bend down to the main branches (except fir trees). We bend the small branches at the branches create triangular deflection here. The top of the tree, which is close to the body, is in the opposite direction of the body.

When making the tops, do not use as many branches as the top but only one branch to the top, so that the tops are not edged.