Planting techniques of Rose Anh

The technique of growing roses can be applied in many different ways such as planting trellises around the wall, arch or hanging pots and many other planting options. And no matter where the flowers are grown, they are always brilliant.

Rose Anh has bright colors and beautiful vines, so it is considered the queen of tropical vines. Especially when planting Hong Anh wire where a fence or balcony has its branches down can create a green wall of bright, bright pink flowers. Rose Anh Vines can cling and reach a height of 4.5 m in warm climates.

Large, tubular British Roses grow at the ends of branches. The flowers are pale to dark pink and resemble red, white flowers with a yellow center. But pink is the most commonly grown flower color. Here is the right technique to plant roses for those who love to plant this flower for reference.

Like Rose Anh

There are 2 types of British Roses, single and double. A single rose has 5 petals like the lily, the lily. Double British Roses have more petals than about 3-4 layers. The persimmon fruit is cystic, low in seeds and spiny.


Hong Anh wire prefers sunny places but can also tolerate semi-shade. The tree is suitable for humus, well-drained soil. Always keep the persimmon tree moist, but do not allow it to get submerged. Hong Anh is suitable for places with a warm, humid climate, with adequate light, can also be placed in a slightly shady place, but if the light is not enough, there will be few flowers. A suitable growing temperature is 20-30oC.

Planting techniques of Hong Anh

This plant is usually planted by cutting in Spring, Summer and Fall.

Hong Anh wire can be propagated by cutting, cutting the old stem and using drugs to stimulate rooting and growth. Wire Hong Anh has a fast growth rate in a warm environment. Highly adaptable to soil, but best grown in sandy soils that contain a lot of humus, well-drained, loose and nutrient-rich soil. If you are using homemade soil, mix ½ as organic manure (vermi-compost, tribat cow manure).

With an area of ​​about 3m2 climbing, you need a pot about the size of a large foam box. As for the larger truss, it needs a slightly larger pot. First, pour the soil into a pot about 2/3 of the pot or more. Remove the potting medium, put the tree down, and bury the soil. Do not let the stump submerge deep into the soil.

After planting, you must remove the stakes to keep the plants gently, remove each winding and squeeze them on your climbing platform, remove as many rewinding tides, the faster the tree will climb.

If you like planting in the soil, first dig the hole 3 times the pot, then put the plant down and do the same steps in the pot.

Take care of Rose Anh plant

When the line is in the development stage, it is recommended to apply fertilizer 3-5 times, but should not apply too much nitrogen to avoid the case of strong growth but little flowering. When the vine is flowering, pruning should be carried out. If the tree is 1 or 2 years old, it should only be pruned a little, mainly correcting the shape of the rope. If you have a long time, you can prune in the spring to stimulate new branches.

Common pests and diseases

The most common disease in Hong Anh roses is a sap absorbent aphid. When the leaves curl, the flowers are atrophy, check that there are many tiny white spots, the plant is infected with aphids. To prevent pests and diseases, spraying with insecticide for plants is best so sprayed on a sunny day, the possibility of aphids will be higher. If you have young children, you should spray diluted dish soap to avoid toxicity.

Also, regularly remove damaged leaves under the base so that moisture can cause fungal diseases. Cut small, thin tops for new, healthier branches to grow. Prevent aphids by spraying ants on the soil of plants because ants will release aphid eggs everywhere.

Instructions for planting and caring for Japanese palm trees

The Japanese palm tree stands out with its radiant foliage like beautiful green umbrellas. Not only has the effect of creating a green space for the garden space, but these palm trees also purify the air to help make the environment healthier.

Characteristics of Japanese palm tree

The Japanese palm tree is inherently related to the areca species, the scientific name of Licuala grandis. Trees native to several Pacific countries have an average height of about 1-3m. Trees belong to the columnar type and on the tree with many scars are the remains of old fallen leaf sheaths. On the sheath there are small, pointed spines that grow evenly on both sides of the leaf rim and sheath. The leaves are usually concentrated in the apical part with the tip of the lobe slightly concave divided into two shiny green blades.

If the leaves stand out with a radial circle, the flowers of the Japanese palm tree grow in small clusters with characteristic white color. When the fruit falls off will be replaced instead. Young pods will be green and when ripe, they will turn bright red, making them stand out from a distance and catch the eye.

Japanese embankment tree – a unique and beautiful green plant

Currently, public green spaces are particularly interested in, especially in big cities. Greening roads, parks or public buildings is understandable to improving polluted air. The Japanese embankment tree has green foliage all year round and is beautiful, so it is favored for decoration in public places, home garden villas.

Not only that, the Japanese embankments are also able to withstand the semi-shadow, so they are often planted in pots for office interior decoration to help bring green spaces into the house equally luxurious.

How to plant and care for Japanese palm trees

Japanese palm tree has a rather slow growth rate. Plants are considered to adapt well to full light conditions but can still be grown in low-light areas such as in offices, etc. In places with tropical climates like our country, the tree is quite well adapted but must be planted in loose soil conditions.

Planting and propagating methods

Currently, Japanese embankments are planted and propagated by seeding method. The seeds chosen are old seeds and are obtained from healthy mother plants. After that, sowing in the soil to keep moisture for about 2 weeks will germinate. After getting 4-5 real leaves, you proceed to move to a new place to plant.

Japanese palm care techniques

When the tree is young, it loves chili peppers, so you need to create a scaffold to shade the plant. During this period, you need to water 3-4 times a week is enough. The amount of irrigation water needs to be clean sources that are not polluted.

Japanese palm care techniques

Periodically add fertilizer to the plant every year to help enhance the soil nutrition to keep the tree healthy. The type of fertilizer that needs to be applied is NPK fertilizer and foliar growth fertilizer. When fertilizing, you can mix it with water and water it evenly over the plant.

Prune a tree branch

The most beautiful tree is the leaf and stem, so it is necessary to prune periodically to remove bad branches, old branches to help create ventilation for the tree to absorb more light and prevent pests and diseases. The shape of the tree is more beautiful.

Other uses of Japanese palm tree

The Japanese embankment has a beautiful shape, is easy to plant and brings a clean atmosphere because of its special ability to absorb and purify the air.

Interesting things about the Chinese Taro tree

Chinese Taro trees, indoor greenery are becoming the trend of the people because they provide fresh, cool air and trees are also a way to neutralize emissions in our homes.

Planting trees indoors is becoming the trend of everyone because they bring fresh, cool air as well as help homeowners always feel comfortable, happy and love life. Especially, at work, trees are capable of purifying the air, bringing everyone comfort and comfort. Among many species of trees today, Chinese Taro is loved and chosen by many people.

Characteristics of Chinese Taro

The leaves are heart shaped and have many red spots on the leaves, but there are also trees with white spots, long beige-shaped stalks, and cluster roots.

The role and use of the Chinese Taro tree

As an ideal indoor plant, the Chinese Taro tree is chosen by many people to plant in the office of the company, in the house or restaurant. The leaves are large, wide and have the ability to purify the air very well, helping the environment become much cleaner and cleaner. Thanks to the Chinese Taro tree, the space becomes new and more beautiful. Especially, for those who often work tense and tired, the pots of Chinese Taro plants are very necessary, they help everyone’s spirit to be much more refreshing and comfortable.

Planting and taking care of Chinese Taro

The Chinese Taro tree is easy to grow and adapt to the environment. They can grow and thrive in soil and hydroponic environments. Not only that, if you take good care of it, the leaves are still very big and green, as well as flowers will bloom continuously.

Although the Chinese Taro is a shade tree that can live in the shade, it is still advisable to leave it under mild sunlight for 1 to 2 hours a day so that it can photosynthesize. If growing hydroponics, it should be noted that the water must be clean, be changed periodically as well as supplemented with adequate nutrients. If planting soil, special attention should be paid to watering, especially in the summer so that the plants do not dry out. However, not too much watering can cause death. In addition, should periodically supplement nutrients to always be green.

Growing Chinese Taro is not difficult, it only takes a little time and effort, the grower can own a pot of green plants, rich in meaning as well as high aesthetic value, making the space fresh and full. more vitality.

Fern care techniques

Ferns are easy to grow plants in a home environment, because they live in a dimly lit environment with a low climate. Found in many countries with temperate climates, they have reproduced and developed over many millennia, from which the strong vitality of this plant can be seen. However, in order to have a green array of beautiful ferns, they need to pay much attention to its behavior and circadian rhythm.

In this article we will show you how to take care of the fern potted plant so that the tree looks beautiful green, and grows brilliantly in our home environment.

Water the fern

During the process of planting, taking care of until enjoying the beauty of the fern, the issue of fresh water, moisturizing and supplying nutrients into the water is the most essential. In addition to choosing a soil for ferns to adapt, we also need to pay attention to watering the plants to keep them moist, just by mistake for about a week the tree will become rotten and the leaves become yellow. If you are planting a fern indoors, you should prepare yourself a pot large enough to get rainwater, especially rainwater when it rains with thunder or lightning.

Apply fertilizer to ferns

Ferns do not need too much nutrients, but for plants to grow fast and have an eye-catching green color, we should provide a small amount of urea to the plant. Supply Urea to plants by mixing Urea in water with a small amount, then water the ferns once a week or when the plants turn a little yellow, water the plants.

Prune for the fern

The fern grows fast, so the number of old and withered leaves causing loss of aesthetics almost every week. Therefore, we need to prepare ourselves a pair of scissors to prune those withered old leaves to ensure that it does not affect the aesthetics of the fern pot.

In fern techniques, we need to pay much attention to the irrigation regime and how to provide nutrients for plants in a scientific way. Do not apply fertilizer directly to the fern planter, so it is easy to shock the tree, leading to root and stem rot.

Instructions for propagating porcelain flowers

In tropical monsoon regions Hoa Su is one of the bonsai trees planted by many people for indoor decoration. However, multiplying the porcelain flower tree to make the porcelain flower beautiful, the body is plump, especially the ton, the majority is unknown. In this article, we will show you how to multiply porcelain flower to make it healthy.

1. Choose the mother plant

Any way like the character also needs the mother tree, the porcelain flower tree is no exception. The tree we need to choose the same well, the stem is overflowing with live sap, the leaves are even, the flowers are brilliant. Do not choose too old parent plants, because if the mother tree is too old, the tree of vitality will not list the young mother plants. If you do not choose a father tree with too few leaves, a porcelain flower tree with evenly thick leaves will give many flowers and branches. Flowers of Hoa Su tree usually grow at the beginning of each small branch, because the porcelain flower tree is too sparse. flowers will not be much.

2. Prepare to crush porcelain flower tree

Porcelain flower pots usually growers will choose to smash cement plants, have optimal drainage, because porcelain flowers are water plants, if not well drained, porcelain flowers will be damaged and waterlogged.

3. Land to plant porcelain flowers

The porcelain tree does not need much nutrients in the soil during the plant phase, so we do not need to pay much attention to nutrients, but the most important thing to keep in mind is that the soil plant must be a parallel flesh plant. for the purpose of ensuring Hoa Su does not get flooded when we plant pepper or make it rain.

4. The method of artificial duplication is too best

There are two methods of propagating to Su flower plant, propagating by branching method and propagating method from Sui parents.

Propagation method by branching

Choose the mother porcelain flower tree with listed vitality, set it up for good growth, then choose a pleasant time. When we have all the above factors, we proceed to separate stems from the parent porcelain flower tree, then cut new branches apart to prepare in advance.

The priority of this method is fast, the time for the seedlings to flower is optimized for efficiency, but the vitality of the seedlings will not be listed by seed propagation. Moreover, with this propagation method, the stump of the porcelain flower is not as beautiful and beautiful as the seed-propagated stump, this is a point that many bonsai players always try to avoid.

Propagation method is the same as planting from porcelain flower

Porcelain flowers give beautiful flowers all year round, when the porcelain flowers bloom, we conduct pollination for them, when the flowers are pollinated, we proceed to operate the plant in a thoughtful way, not to lose our parents. want to get with the other Mission, because if are so mut will go to the state back to create a guit do not want to we we.

5. Seedlings of porcelain flower to get plants

When the porcelain results and ripen evenly, we proceed to harvest the results of the porcelain and then expose it to dry under the sun, then we beat as prepared above. Every day we have to start separating water to provide water for white porcelain because germs, when the plant is 1 week old, we start to let the plant out in the sun, the porcelain flower is a sun-loving tree.

Seedlings are grown by seed propagation, giving strong stems and systems, as long as 5 months old, porcelain root is very eye-catching to those who like to play indoor plants.

To have to be beautiful tree, we are not need more time, because Hoa Su grows quite fast, but Hoa Su tree is easily flooded, it should be noted that we have to choose a type with drainage system. easy design.

Common mistakes when taking care of aquatic plants

Taking care of aquatic plants requires certain knowledge about ornamental plants and especially the knowledge of aquatic plants, in this article we will mention common mistakes when caring for particular ornamental plants. Planted in aquatic environment.

1. Hasty

This is the most common mistake, the new people practice playing or want to have a beautiful lake, stabilize it immediately, want the plants to grow fast and drop the shrimps soon. An aquarium 1 is a miniature ecosystem created by itself, and an ecosystem that is closely linked to many factors, so we cannot perfect them in a hurry.

2. Use too many lights for an aquarium unnecessarily

This is a mistake I want to mention Monday because there are 9 new players who have 9 you want to be bright. Do you not find out if the plants you need really need a lot of lights? Or are you ignoring the needs of the trees in the lake and only turning on the lights to serve your eyes? Light is a large amount of energy you provide to the aquarium, if the shade-loving plants suffer from a large amount of light, it is very weak, easy to yellow, burn leaves. Also when the excess energy, moss will have to appear to absorb that energy. Even light-sensitive plants are easier to work with when you use moderate light, which helps to provide more co2 or water.

Tips for using lights for aquatic plants

If you play the Moss plants, moss, nana, live plants’ ferns (Shade plants), you only need to use a small amount of light, for example a 60cm wide 30cm tank only requires 1 t8 ball or 1 ball 5h0 high up is enough (1 light, not 1 light), lighting time can be 8 hours, but should be open for 5-6 hours when the set up increases weekly. If the lake 60 is 40cm wide, it is recommended to use 2 t8 balls, if it is T5Ho, it only needs 1 ball in the first time, then gradually increase to 2 balls when the lake is stabilized, put it up to 10-15cm high the better. If it is Led, you should adjust the low level and also raise it high.

If you play bucep: bucep is a slow growing tree, so it is easy to get harmful. Bucep will be nice if you use a lot of light, but the ability to moss is also very high, so my advice is when planting bucepen you should use medium light is enough, the plant is both beautiful and clean and not mossy attack. This sufficient amount of light can be like a moss of dx on the top or slightly increased.

If you plant a lot of trees, Dutch style: these plants are light-demanding (Sun plants), but don’t think you need to provide too much light for your tank. You can use twice as much light as a moss pond, dx is enough, but remember to increase gradually from less to higher.

3. Lazy learn

Understanding here is not necessarily intensive, scholarly. Learn simply by taking the necessary knowledge to prepare you in this hobby. In terms of plant physiology, you cannot plant trees in a hot environment, for example, or raising fish and shrimps, you need to know about physiological characteristics of each type. With the development of technology, you can almost find the most necessary information. And I make sure that with a bit of diligence to learn and read, combined with the experience drawn over time, you will succeed soon.

4. Apply information too rigid, lack of refinement

This is another common mistake. Aquariums have many types, styles and ways to play. Each different aquarium has a completely different micro-environment and environment system. So it is quite unreasonable for you to apply completely 1 experience, the way to play 1 lake for your lake. For example, you can not apply the number of lights of a tree and then use it to grow a pond at home. The aquatic experience is like the face towel, the toothbrush of each person, you can look at it, buy it and use it, you can’t take it and use it immediately.

Advice: should receive comments, experience screening and apply a logical way and adjust for reasonable.

5. Release fish and shrimps soon

Nature lovers must love the smallest creatures of mother nature. Some shrimps, tiny, cheap fish, but they are also the souls worthy of attention and care for the players. Many new players often rush to drop shrimps too soon, right after setting up the lake or during the period before the microbiological system is stable (usually 3 to 4 weeks), and the possibility of dead shrimp in this time is very high. On the other hand, when the shrimps die during the unstable period, the system will continue to make the system more difficult to stabilize.

Advice: after setting up the tank, run the filter for 3 to 4 weeks so stocking the shrimps, can light the microorganisms, and oxygenate the microorganisms for faster growth. In case of early release of shrimps, you can use microbial API Quickstart.

6. Drop too many fish, release inappropriate fish, feed fish too much, take care of fish too much

Aquariums have to be released as a natural thing, but many of you are too involved with fish but drop too much, or drop unsuitable fish. Organic matter in fish feces is a major cause of microbalance imbalance and causes moss outbreaks – the number one enemy of aquariums. Another important issue is that you should feed fish moderately, once a day, which is enough, because fish food is a very large organic source. Limit your hands to the lake and avoid taking care of the fish too much unnecessarily.


A moderate amount of fish should be stocked, eg a 100 liter tank of water – 60 cm, so only release 30 to 40 aquatic fish such as neon fish, red head squirrel, lake 90cm (200 liters of water) can drop 60-70 fish , and a 1m2 (300 liter) tank can stock 90-100 fish.

The type of fish should be limited to stocking in the aquarium is: mackerel (you can drop a few fish for the first time to fish off the viscosity from driftwood), 7-color fish, first bee fish (should drop less), yellow goby (should be limited because of it or digging ground), rat fish (limited because of scratching or scattering the lake dust). Moderate feeding of fish. Do not take care of fish too much.

7. Do not spend time taking care of the lake

Aquariums will always be more beautiful and stable if cared and cared for every day. You can only spend 5 to 10 minutes every day cleaning, watching trees and shrimps to see if there are any problems. Harmful mosses when they first appear will be easier to treat than letting them flare up after a few days. Aquatic plants, fish disease, too, if you discover any problems early and find the right direction, it will be easy and effective. In addition, when you spend less time with your aquarium, your brain will always secrete a substance that causes stress reduction, delighting as an addictive substance, and you will always keep the fire of passion for animals. Play this.

Tip: simply try to spend some time with the lake every day, just enjoy your achievements, and find unsettling problems to find solutions soon.

8. Replace the water too much, clean the tank and filter too well

Many new players think that the new lake, the dirty lake, will replace as many countries as possible, even replacing 100% of the water every day. Actually changing the water and taking care of the lake depends on the lake, each type of substrate … But the root of a stable aquarium is a stable micro-system, and too much water changes will affect the system. this microbe. Besides, the cleaning is also a good thing to do but depending on the lake. There are lakes that only need to clean the filter every few months, even years, but many lakes with sophisticated features should be cleaned monthly.

Tips: do not overdo the water change too much, in case of necessity to change water a lot, it is better to divide it daily. It is recommended to combine with the observation of the lake situation to provide a suitable water change, tank cleaning and filtration plan. Never clean the filter too much and never replace the water and toilet with the same filter for 1 day.

9. Excessive abuse of unnecessary products

The psychology of new players often hears people say or read about aquatic products first and then buy them back into the lake in a blameless way. The use of iron – Fe is essential for aquatic plants and it is often in short supply, but just providing a small amount of Fe is more than enough for all plants in the lake (0.03 to 0.1 mg / l is more than enough). Fe is also a heavy metal that is toxic to plants and shrimps if you are overdose. New players often light Fe from 2 to 3 different sources of water without knowing that they are poisoning and mossing their lakes.

Tips: Consider and explore, ask experienced people to advise you more about aquatic products and how to use them. Avoid using an unreasonable way.

10. Too hasty to conclude when not sure

Many newbie friends and some of you have played aquatic life for a while, often having this mentality. They experience a bad problem or succeed in a certain situation and then confidently argue that other friends will also meet and be forced to deal with themselves. But no, the aquatic knowledge is so big and endless, the new friends do not rush to conclude that 100% of them are sure, even the long-time pro they always consult new people and guide people with 1 moderation. The more they play, the more understanding that nothing is 100% certain in this hobby.

Tips: just experience, learn and draw experience. If possible, share it to help others but don’t make sure to say it, show it in this hobby.

Experience in growing aquatic plants and things to note

It is important for newcomers to choose aquatic plants for aquariums. Should choose aquatic plants that are easy to live, easy to grow, low difficulty.

The article shares experiences, guides and explains why new players should float some aquatic plants before planting or attaching to driftwood rocks on the bottom of the lake.

1. Drop the aquatic plants in the lake before plugging into the lake

Co2 and O2 gas in growing aquatic plants

Most of these plants need to be removed are shallow plants, tissue transplants, or water-leaf plants but have just changed the environment too differently from the old ones. The common point of these plants is that when in the old environment, for example, the concentration of the most important nutrients such as carbon in the air is always very high, many times higher than the aquarium. most balanced. For example, the average amount of CO2 in the air is more than 300 mg / l (300 ppm), while in an extremely good Co2 gas reservoir, it usually stops at 30 ppm, 10 times less.

In tissue culture environment, the plant absorbs a huge amount of Co2 gas in a comfortable and direct way. O2 gas does not need to discuss much about the concentration between shallow and underwater environments. Both Co2 gas and O2 gas are more abundant in the aquifer surface than at the bottom, so the first time drifting is necessary for the tree to not be deficient in these two essential substances.

Nutrition for plants before putting them into aquariums for planting aquatic plants

The plants are exhausted and tissue culture implants mainly through the roots, unlike the nutrient uptake mechanism through leaves, the roots of plants have the ability to select the necessary nutrients without being easily poisoned. In addition, the surface layer of the lake usually has good flow and nutrition is best transferred to the roots and leaves

Environmental shock

In addition to o2 gas, co2 and nutrition gas, the shocking of plants also causes great shock, if this environmental shock is accompanied by a lack of o2, co2, the likelihood of dead plants and leaves will be very high. Aquatic plants need time to adapt, and floating on the surface of the lake is a good way to root trees, adapt to the new environment.


The temperature has a direct effect on the amount of o2 dissolved in the water, if the temperature is cool, the plants will lack o2 gas.

Water pressure

The tree is exhausted when it is launched at the depth of the lake, water pressure is also a cause of stress. The internal pressure needs to be pinched abruptly, from which the metabolic activities in the plant also decrease, from which the plant is difficult to grow and even unable to grow.

The light

This is another reason, some shallow plants need light directly from the sun, and when floating on the surface of the lake, they have access to the energy from the lamp in the best way.

2. Experience drifting aquatic plants before plugging in the background

It is recommended to rinse the plants, remove them from large dust. If it is a tissue culture plant, it is necessary to wash the nutrient gel layer because this solid nutrient is easy to cause mold and bacteria to attack plants.

Gently and carefully with roots and leaves, avoid damaging plants during this sensitive period.

You can insert plants into driftwood near the water surface to fix it, or buy a box like fish in a clip, or you can simply make it quite easily, as long as you leave the tree in the water layer.

Tree should be floating in the surface layer from 3-7 days depending on the tree and in case, when the roots grow out (white), the tree may be ready.

Should choose a lake with stability to float and grow these sensitive plants.

Do not launch too many plants at once in a tank, because there is a chance that the bacteria will attack and spread during the time when the tree is weak.

If you are careful, you can gradually change the depth of the plant to the adapted tree, for example when the tree is already rooted, you attach it to the driftwood branch in the middle of the lake first, then descend to the bottom.

The temperature of the lake floats so cool, ideally from 20 to 26 degrees.

The floating lake should be filtered or scooped out to filter the surface to make the surface layer, providing enough o2 for this time tree.

The floating drift is required to have good co2.

Nutrition of the lake may not be very much, but it must be clean, avoid organic and micro-organism.

Avoid changing too much water and changing the temperature of the aquarium drop this time.

A light dose may be used according to the instructions for tree size bottles such as VitaTM, Seachem advance, ADA Green Gain, Nuphar Faster.

For aquatic plants it is necessary to let them float on the water so that they can get used to the environment in the new lake. Obeying exactly what we have just shared will conquer most aquatic plants in the early stages.

Guide to planting and taking care of orange trees technically

In addition to being loved by the delicious taste, the orange also supports digestion, strengthens the body, enhances eyesight, anti-cancer, anti-inflammatory, good for the skin, reduces the risk of cardiovascular disease, and if you love bonsai, you can grow orange trees as ornamental plants in your garden.

1. Prepare planting tools and soil

Planting tools

You can take advantage of cement bags, sacks, pots, trays, foam boxes that are available indoors or empty plots in the garden to grow orange trees. Note: Perforated bottom of the tray for drainage. Planting tools are over 1m in size.

Orange is a light-loving tree and suitable for growing in areas with temperatures between 23 – 29 degrees C.

Land for planting

Orange trees can be grown in many types of soil from valleys, old alluvial soil, newly reclaimed hill land, alluvial soil and alluvial soil … The most suitable soil type is soil, much humus, good drainage, water level. underground under 1m. The arable layer is about 0.8 – 1m thick, the pH is 5 – 7.

Before planting, fertilize manure of decomposed animal manure, lime and dry it for 15-20 days before planting to treat pathogens in the soil.

2. Choose varieties and grow oranges

Currently on the market there are many varieties of saplings and you can choose varieties depending on conditions and preferences.

Oranges are usually propagated by seeds, branching or grafting. The kind of extraction of the branches will quickly turn left but the life expectancy is poor, the roots are weak. Grafted trees are healthier, longevity, healthy root development. Planting with seeds will take longer to produce fruit and productivity is often worse.

Seedlings you can find are available in the seed bar to save time and effort.

The most appropriate time for planting orangering oranges is at the end of the dry season at the beginning of the rainy season or at the end of the rainy season if conditions are available to irrigate.

When planting oranges oranges, holes of size 40 x 40 x 40cm or 60 x 60 x 60cm, high hills need to dig holes larger than 70 x 70 x 70cm. The distance of planting 4 x 5m oranges and oranges planted with a distance of 3 x 3m.

When planting, you use a hoe to dig a hole larger than a little bulb in the middle of the hole, put the seedlings in, use the foot to lightly compress the soil around the root, insert the stakes to fix the tree, avoid the wind to shake the roots, the plants are easy to die. If planting in dry season, after planting need to cover the roots with straw, dry grass to retain moisture.

After planting, immediately irrigate, then continue to water and keep the plants moist for 3 to 5 days during the first 1 month so that the plants can quickly root.

3. Take care

Need to provide enough water for the tree in the dry season, when the fruit is growing and the fruit is about to ripen.

To limit weeds, cover the roots with straw, dry grass, mulch, green manure to break the scum after heavy rains. Weeding the spring crop from January to February and the autumn season from August to September, clearing the entire area once per crop; a year of original cultivating 2-3 times.

After planting follow-up cut off the excess branches and buds growing from the rootstock. About 1-2 months when the tree has begun to root, sprout the tops in the afternoon of 70cm. Retain 7-10 healthy buds, evenly distribute stars around the root, avoiding obscuring light from each other. At the stage of mature trees, regularly remove old branches, pests and branches that have collapsed.


First year: After one month of anise, apply top dressing with diluted nitrogen fertilizer (1%), once every 15-20 days.

Phase 2 – 3: Each year apply 10kg of manure (micro organic fertilizer) + 100g urea + 300g super phosphate + 100g potassium divided into 4 times.

+ 1st time (September – November): 100% organic fertilizer + 100% super phosphate.

+ 2nd time (January – March): 40% urea + 40% potassium.

+ 3rd time (May): 30% urea + 30% potassium.

+ 4th time (July – August): 30% urea + 30% potassium.

Business stage (3rd year onwards) continues to keep the rate of fertilizer and number of fertilizer as above, but increase the amount of fertilizer for each year as follows: 30kg organic fertilizer + 500g super phosphate + 500g urea + 500g potassium.

4. Harvest

Harvest when pods turn from green to yellow (about 20-30 areas of pods). Need to harvest at the right time to create plants to differentiate flower buds well, collect fruits on cool days.

Using scissors for cutting fruit stalks, collect fruits gently to avoid mechanical damage.

Guide to growing lemon trees as ornamental plants

Lemon has a myriad of uses from cooking to beauty, but not everyone knows how to grow lemons in a pot so that the plants grow well and get the most fruits.

Lemon is a fruit that is used a lot in everyday life because of its numerous uses. Not only is the fruit helpful in the kitchen, mixing soft drinks to help with heat, lemon also helps women to beautify their hair such as smooth hair, clean dandruff, treat oily skin, exfoliate and many other effects .

Not only that, all household items can also become clean and shiny thanks to the mild acid found in the lemon. There are many such uses, so it is not uncommon for lemons to be grown by many lovers in the house. To solve the shortage of spacious garden in the city, planting potted plants is a reasonable choice. However, not everyone knows how to grow lemons in pots and take care of them so that lemon is wrong.

Crop planting season

Lemons can be grown year-round throughout the month but the best time to plant them is in March or July, August and October. These are the times when lemons are easily fruitful and grow best.

Choose pots to plant

Many new lemon growers will think of using lemon seeds to grow, this is not wrong but you can take years to wait for results. Therefore, unless you want to plant ornamental plants, buy commercially available plants in markets or places where trees are sold.

When choosing a pot to grow lemons, remember to select pots about 25% larger than the roots of the plants. The most ideal pots are terracotta pots because they have higher porosity and evapotranspiration capacity than plastic pots. This is an important factor that helps plants grow well because lemons are an aversion to water retention.

Repotting should be done every 2 years, consistent with the size of the plant. Usually each time the repotting should choose larger pots than the old one and should conduct repotting in winter.

Choose a soil

Quality and soil types are also one of the top concerns when growing lemon trees. Lemons can be grown on a variety of soil types, but it is best to be porous and loamy. Soil type with a pH of about 5.5 to 7 is most suitable.


Remember to apply fertilizer to plants about once a month during the growing season, around February, March and August 10.

A potted lemon tree needs a balanced amount of fertilizer 18-18-18. When lemons begin to flower, add powdered red potassium fertilizer to lemon quickly.


For those who first plant lemon, the problem of watering plants is really difficult. Because lemons are a type of plant that requires an appropriate amount of water, more or less water can cause the fruit to fall, or even kill the tree. If the soil is too dry, salt may appear and damage the roots. Therefore, it is necessary to keep the soil to ensure reasonable moisture.

If you want to check if the soil has enough moisture, press your finger deep into the soil about 2 to 3 cm, if it feels dry, water it immediately. In hot and windy days, water plants more often. And avoid leaving pots in a place with too much wind.


Although the plant is grown mostly outdoors, the lemon is quite cold and does not tolerate places that are too windy. So just leave the lemon outdoors for 7 to 8 hours and the highest point is 12 hours on beautiful days.

The location of lemon pots is best to have two faces exposed to sunlight in the East and South, or the West and South. Place the potted plant in the most sunny position possible.

Pruning and pruning roots

Pruning helps plants grow luxuriant and easier to correct more fruit. However, this should only be done when a new development season begins. Special note, only pruned with pests, died because if pruning too much can cause the tree to bear horns.

Besides, you should also pay attention to some strange branches, they often grow directly from the main stem, and suck up the nutrients of the plants, so they must be removed immediately.

By the time you change the pot, you should also prune the root of the lemon tree, so when you prune the lemon, the lemon will quickly bloom.

With suggestions on how to grow lemon in this pot, you will have the wrong lemon tree, hand-picking fruits. Good luck.

Techniques of planting Thien ly flower plants

Techniques for growing flowers in Thien Ly according to two methods of cuttings or planting with seeds are quite simple, anyone can grow without losing too much time to care.

Techniques for planting Thien Hoa flower are quite favorable for growers as they can adapt to many different weather conditions from temperate climate to subtropical climate.

The flower of Thien Ly is also known by the other name, the flower of the flower of the incense. The physiological tree has a soft, woody body, heart-shaped leaves with flowers growing in bunches in the leaf axils. This is a flower with a mild scent, delicious soup, so many families choose to plant around the garden.

Appropriate temperature for planting Thien Ly flowers

Thien Ly flower grows strongly in spring or autumn when the temperature is about 20 to 35 degrees C. The plant is suitable for growing places with lots of light and ventilation. In particular, Thien Ly flower plant can be grown on many different types of soil but must ensure moisture must be kept right. If the plant is drought for a long time, it will grow slowly and not flower.

Choose the flower of Thien Ly flower

Like other plants, breeding is an important stage and so is Thien Ly. Therefore, when choosing seeds without disease, the ball has to choose a minimum diameter of 6 to 7mm, if 10mm is best.

Techniques of planting Thien ly flower plants

In order to grow normal physiological flowers, people will use cuttings, so the tree is very fast growing. But first, it is necessary to carry out the nursery, so choose sandy soil and incubate in a well-ventilated, quick-draining water. The first is the ash or ashes to prevent plastic flow, dehydration and antiseptic, and then cultivate into the prepared pit. Then put the manure under the bottom to provide the source of nutrition for the root. When planting remember to put the tip of the nursery to the ground 10cm and then plug the stick for climbing plants, just let 2 sprouts into rope to climb the truss.

Because it is a trellis, it is quite important to do rigging and to create a cool and shady look to see the eyes of the bright yellow flower petals, the sweet and fragrant fragrance. Depending on the conditions as well as the needs of the growers, making rigs with iron frames or bamboo frames is exempted as long as it helps Thien Ly climb faster and produce more flowers.

The plant is moist but does not tolerate water logging, so when there is a stagnant water, it is necessary to quickly drain the water if the tree quickly dies. The top dressing is only done when the vines are 2 meters high, at which time the root system has developed. Do not water directly and root but about 60cm or the plants will get fecal poisoning.

Regularly proactively take the branch off the rig. Avoid branching together. Regularly prune old leaves, incubate and re-fertilize the plants. From the second year on, every year cut all small wires and leaves into Eastern period to kill pathogens and prevent cold.

Pests and diseases and ways to eradicate for Thien Ly plants

Flower planting techniques Thien’s biggest headache is preventing aphids. This type of disease is quite dangerous if not destroyed promptly because they will make the tree unable to flower. Therefore, it is necessary to check daily from the beginning of the leaves, immediately kill by hand, if many must use a broom broom. Especially when the flowering tree needs to be closely monitored to see if it is in the bud if not, then use sharp toothpicks to kill the bugs.

In addition, attention should be paid to black fungal diseases such as soot and soot called soot, growing on leaves and wires. This disease causes the plant to melt and weaken. Prevention by trimming the leaves, not too thick. In addition, the lime water phase sweeping on the wire with soot will be very effective.

The way for the flower of flowers to proliferate over the years

In addition to applying the right techniques of planting Thien Thien flowers, if you know how to take good care of flowers, they will bloom all year round. Since winter comes to a stop growing tree, cut off the side branches and leave the main branch. Through cold winter to spring, the main branches will re-sprout new and continue to grow for flowers next year. With such a simple step, just plant a Thien Ly flower crop for your whole family to eat year after year without spending too much effort.

Above are the technical steps to plant Thien Ly flowers most basic for the three housewives referring. In order to grow the true God-like platform, please equip yourself with more knowledge through books, other people’s planting experience or it is better through technical experts to plant flowers, planting techniques Fruit to apply into practice effectively.